加强电站无功管理

加强电站无功管理，不但能改善供电质量，满足电网的要求，提高单位的经济效益，而且使设备的安全运行得到了保障。     

应用激光活化饵料藻种的研究

应用Nd:YAG激光(波长1.06μm,功率5w,照射时间0.5-3 min)和Ar+激光(波长488nm,功率70mw,照射时间5-15min)对长期保存的不同保存形式的塔胞藻(Pyramidomonassp.)进行辐照处理。研究了不同剂量激光辐照对藻体生长和叶绿素含量的影响。实验结果表明:照射剂量为60s的Nd:YAG激光及剂量为15min的Ar+激光对液体保存形式的藻种有较明显的促长效果,接种后这两种激光处理组的比生长速率分别较对照提高达53.33%和28.89%,叶绿素含量分别增加73.33%和65.69%。两种激光对液体保存藻种的活化效果均好于固体保存种。     

High resistivity measurement of SiC wafers using different techniques

To establish fast, nondestructive, and inexpensive methods for resistivity measurements of SiC wafers, different resistivity-measurement techniques were tested for characterization of semi-insulating SiC wafers, namely, the four-point probe method with removable graphite contacts, the van der Pauw method with annealed metal and diffused contacts, the current-voltage (I-V) technique, and the contactless resistivity-measurement method. Comparison of different techniques is presented. The resistivity values of the semi-insulating SiC wafer measured using different techniques agree fairly well. As a result, application of removable graphite contacts is proposed for fast and nondestructive resistivity measurement of SiC wafers using the four-point probe method. High-temperature van der Pauw and room-temperature Hall characterization for the tested semi-insulating SiC wafer was also obtained and reported in this work.     

计算机网络安全系统设计

分析了现代计算机网络所面临的威胁和各种安全问题,同时提出了在设计一个有关网络系统时应该考虑的一些安全问题,如网络安全策略与技术、网络的访问控制、网络数据加密技术、信息隐藏技术等安全问题。     

氨精制装置运行问题分析及改造措施

通过分析中国石油兰州石化分公司炼油厂氨精制装置存在的运行问题,提出了相应的改造措施,包括在分凝器脱液管线上新增隔离阀门、更换三级冷凝冷却器、更换氨压缩机及采用低温结晶脱硫工艺等。改造后装置运行结果表明:三级分凝器出口温度由70℃降至小于35℃,压缩机吸气量由5 m3/m in提高至74 m3/m in,原料酸性水中硫化氢质量分数下降45.5%,氨质量分数下降55.5%,净化水合格率达100%,氨精制塔塔顶温度下降5~20℃,液氨中氨质量分数由97.05%上升至99.60%,液氨产量达0.125 t/h,实现了装置的长周期运行。     

多孔无机材料的性质及用途

对各种多孔无机材料的制备工艺原理和性质进行了论述，并分析了影响多孔无机材料孔径的因素，介绍了多孔无机材料在国民经济生产中的各种用途，指出了以往研究发展中存在的问题。     

An optimization model for placement of wavelength converters to minimize blocking probability in WDM networks

The introduction of wavelength converters in wavelength division multiplexing (WDM) networks can reduce the blocking probabilities of calls. In this paper, we study the problem of placing a given number of converters in a general topology WDM network such that the overall system blocking probability is minimized. The original contributions of this work are the following: 1) formulation of success probability in a network as a polynomial function of the locations of converters; 2) proposal of an optimization model of the converter placement problem as the minimization of a polynomial function of 0-1 variables under a linear constraint, so that standard optimization tools can be employed to solve the problem; and 3) design of a search algorithm that can efficiently find the optimal solution to the converter placement problem. Experiments have been conducted to demonstrate the effectiveness of the proposed model and the efficiency of the algorithm.     

用CMOS工艺实现VSR光电集成接收机的途径

介绍了10Gbit／s速率的甚短距离光传输系统VSR(Very Short Reach)中的接收机。分析了几种有希望用于VSR系统的CMOS工艺兼容的光电探测器。提出用CMOS电路实现VSR光电集成(OEIC)接收机的可能性和实现方法。     

不倒翁式偏心防斜钻具的设计

目前所使用的各种钻具主要是靠钻具本身的重力来产生降斜力,在井斜角很小时,降斜力一般很小,在某些区块钻井时不能满足防斜要求。据此,设计了一种不倒翁式偏心防斜钻具。该钻具有1段钻铤,钻铤的两端各有1个偏心稳定器,钻铤外表面有一半圆形的偏心块,在钻铤和偏心块之间有轴承结构。利用不倒翁原理,当井斜超过一定值时,偏心块会在重力作用下自动停留在井眼低边,这样就可以将此处的钻柱顶到井眼的高边上去,从而产生一个很大的降斜力,使井斜得以有效控制。     

乙烯基硅氧烷改性苯丙乳液的研究

在苯乙烯 -丙烯酸酯乳液共聚反应后期 ,加入少量乙烯基硅氧烷 ,制得改性苯丙乳液 ,通过红外光谱初步确定了聚合物结构。研究了反应温度、反应时间、有机硅加入方式、乳化剂用量等因素对反应进程、乳液稳定性及涂膜性能的影响。